Published at Wednesday, 07 November 2018. Sectional Sofa. By Jennie Morgan.
Connectors pushing down firmly in a quick motion. Repeat the procedure for the other side, then secure the backs with three black hand, bolts, one in each arm and one inserted from right to left inside the back. Securing the two backs together. Threading into the silver T nut until tight next apply the slipcover to the sectional pay, close attention to straighten the front arm panels and skirt attach the hook and loop strips in the inside back and outer arm for a better fit next place. The ottoman frame top face down allowing the hinged wings to open upward now securely screw in the for support rods into the holes at each corner of the ottoman frame top next open.
Insert one black hand bolt into the bottom hole from left to right threading it into the embedded T nut, make sure all hand bolts are screwed in completely and tight now secure the to seat boxes by placing the center frame support over the inside edges, where the Seat boxes meet at the top lining up the holes on the support with the holes on the seat boxes, secure the center frame support by inserting two black hand bolts from left to right through the holes of the support and box threading them into the silver tea Nuts, until tight put one wing nut on each of the two hands, bolts securing the center support and tighten them securely.
Fab slipcovered sectional first carefully cut the straps and tape on the box or boxes making sure not to damage. The contents then set everything out in a large area to prepare for assembly once all the parts are laid out reference carefully cut open each bag containing the compressed seat cushions in the ottoman cushion immediately inserting them into the proper cushion covers, with the zipper of the cushion toward the Back opening, it may be necessary to shake the cushion and massage it in order to properly disperse the fiber in the back. These seat cushions will continue to decompress for up to 48 hours next open the bags with the compressed back cushions and insert them into the corresponding back covers making sure to stuff the cushion completely to all corners of the cushion cover set, the seat back and ottoman cushions aside allowing time for decompression, while you continue, the assembly next place, the two-seat boxes on their upholstered front rail and slide them together. Matching the holes drilled on the side rails of the seat boxes rotate down the metal center stretcher support in each seat box.
Any content, trademark’s, or other material that might be found on the edijardin.com website that is not edijardin.com’s property remains the copyright of its respective owner/s. In no way does edijardin.com claim ownership or responsibility for such items, and you should seek legal consent for any use of such materials from its owner.
Copyright © 2018 edijardin.com. All Rights Reserved.